Hi Gals and Pals,
My issue is that I have a block of IP addresses below the DHCP range, .75 to .254 for the DHCP range, that are not allowed to use HTTPS. I inherited this firewall with no information about the initial configuration and they did some unecessary things like binding the internal network for a site to site VPN connection to a particular interface.
Even if I set an Any Any configuration in the firewall rule set the HTTPS traffic still does not flow so I am thinking that somewhere they have not enabled this range. Or most likely have specifically denied it. The response from the livelog is all grey so there is not a way to determine where the block might be.
Please fell free to toss out any and all ideas as I am fresh out:confused:
My issue is that I have a block of IP addresses below the DHCP range, .75 to .254 for the DHCP range, that are not allowed to use HTTPS. I inherited this firewall with no information about the initial configuration and they did some unecessary things like binding the internal network for a site to site VPN connection to a particular interface.
Even if I set an Any Any configuration in the firewall rule set the HTTPS traffic still does not flow so I am thinking that somewhere they have not enabled this range. Or most likely have specifically denied it. The response from the livelog is all grey so there is not a way to determine where the block might be.
Please fell free to toss out any and all ideas as I am fresh out:confused: