So I am testing this out. Got ASG 8.3 loaded and here is where I am at. I have a static IP with cloud sigma. When i turn on the server I am prompted to go through the 'blue screen' type install. Not sure what to put in the IP Address, subnet and gateway. I have tried both leaving it as the default 192.168.2.100 and also putting in the static IP address.
I am told all ports are open but I can not ping nor login to webadmin from the https://staticip:4444
I logged into the command line as root and eth0 appears to be setup right. I am told all ports are open. Any ideas?
I am obviously not on there network or subnet, so this would be as if it was being installed in any data center remotely.
Thanks
I am told all ports are open but I can not ping nor login to webadmin from the https://staticip:4444
I logged into the command line as root and eth0 appears to be setup right. I am told all ports are open. Any ideas?
I am obviously not on there network or subnet, so this would be as if it was being installed in any data center remotely.
Thanks