Astaro 320 and Default VLAN1 on HP switch

Hi,

We are replacing at Netscreen25 with an Astaro320, and have run in to problems with our VLANs in a HP Procurve switch. Would be grateful for any assistance. When connected, we're not able to connect to anything in the default VLAN, but the hosts in the VLAN10 we can ping.

Is there something on the Astaro that needs to be set to allow access to the default VLANs? On the Netscreen, there is no VLAN Tag for default VLAN1, only any other VLANs.

Many thanks
---------------------
The HP Procurve has hostname "WEBTEST 2610-24"
interface 26 – (Uplink)
name "Netscreen25 Uplink"
flow-control
exit
ip default-gateway 192.168.2.254
ip routing
snmp-server community "public" Unrestricted
vlan 1 – (uses ranges 192.168.2.0/24)
name "DEFAULT_VLAN"
untagged 1-22,25-28
ip address 192.168.2.1 255.255.255.0
no untagged 23-24
exit
vlan 10 – (uses ranges 192.168.10.0/24)
name "VLAN10"
untagged 23-24
no ip address
tagged 26
exit
no dhcp-relay
ip route 0.0.0.0 0.0.0.0 192.168.2.254
--------------------------------------------------