Hi,
I don't get any data through the RED tunnel. Tested with a single and both WAN links.
The RED live log shows this:
Normally the PING counts up.
And a tcpdump on the RED interface didn't show a single packet.
Connection tested with a pc behind the RED. The pc was configured to request a DHCP address, but nothing happens and with a static IP I couldn't ping the interface either. The firewall is ping visible.
The RED50 config:
Didn't used the deployment helper
UTM Hostname: vpn.company.de
Operation mode: Standard / Unified
UTM
Firmware version: 9.003-15
DHCP on UTM for RED interface
RED network in web proxy
Regards
Daniel
I don't get any data through the RED tunnel. Tested with a single and both WAN links.
The RED live log shows this:
Code:
2012:10:15-16:29:10 fw-1 red_server[9942]: A3400703AB17AB8: command 'PING 0'
2012:10:15-16:29:10 fw-1 red_server[9942]: A3400703AB17AB8: PING remote_tx=0 local_rx=0 diff=0
2012:10:15-16:29:10 fw-1 red_server[9942]: A3400703AB17AB8: PONG local_tx=0And a tcpdump on the RED interface didn't show a single packet.
Connection tested with a pc behind the RED. The pc was configured to request a DHCP address, but nothing happens and with a static IP I couldn't ping the interface either. The firewall is ping visible.
The RED50 config:
Didn't used the deployment helper
UTM Hostname: vpn.company.de
Operation mode: Standard / Unified
UTM
Firmware version: 9.003-15
DHCP on UTM for RED interface
RED network in web proxy
Regards
Daniel