Hi have some question
Running astaro version 9 latest update
need to setup uplink load balancing, my scenario is 1 isp with copperline 10mb connection connected to eth1.
1 3/4G connected to dovado tiny in bridge mode(because astaro has no support for the usb dongel ZTE MF880)connected to eth2 as cable modem
both line has static public ip
I want to use the copper line as primary for all traffic(surf, smtp ..) and if that goes down, the 3/4G line should take over all traffic.
can I set copperline weight to 100 and the 3/4G to 0 and put the copperline as first interface and 3/4G as second interface.
Do i need to use multipath rules for this scenario.
Persistense settings, what should it be in this scenario, default one our
I do not use mail proxy, I use dnat for smtp, https ..
Regards
Rob
Running astaro version 9 latest update
need to setup uplink load balancing, my scenario is 1 isp with copperline 10mb connection connected to eth1.
1 3/4G connected to dovado tiny in bridge mode(because astaro has no support for the usb dongel ZTE MF880)connected to eth2 as cable modem
both line has static public ip
I want to use the copper line as primary for all traffic(surf, smtp ..) and if that goes down, the 3/4G line should take over all traffic.
can I set copperline weight to 100 and the 3/4G to 0 and put the copperline as first interface and 3/4G as second interface.
Do i need to use multipath rules for this scenario.
Persistense settings, what should it be in this scenario, default one our
I do not use mail proxy, I use dnat for smtp, https ..
Regards
Rob