Hi All
My ISP provides “IP over Ethernet (IPoE)” and it seems that UTM doesn' have an option to connect via IPoE if I choose to bridge my modem
Is this connectivity option going to be introduced to UTM?
The settings for the bridge modem will be:
Existing info from my ISP router
I did try PPPoE/PPPoA instead but didn't work (http://www.astaro.org/closed-forums-...-provider.html)
Thanks
My ISP provides “IP over Ethernet (IPoE)” and it seems that UTM doesn' have an option to connect via IPoE if I choose to bridge my modem
Is this connectivity option going to be introduced to UTM?
The settings for the bridge modem will be:
Code:
SP name: O2 Home Broadband
Multiplexing method: LLC-Based
VPI: 0
VCI: 101
Username: leave blank
Password: leave blank
Domain name: leave blank
IP address type: this depends on whether you chose our static IP address option or not:
If you didn't choose our static IP address option, set this to dynamic IP
If you did choose our static IP address, enter the IP address printed in your welcome letter
DNS servers: choose to get these dynamically from the Internet provider
NAT: enable
Primary DNS server: 87.194.255.155
Secondary DNS server: Leave blankCode:
O2_ADSL2plus
Connection Information
Uptime: 0 days, 0:58:02
Data Transferred (Sent/Received) [MB/GB]: 787,75 / 12,87
Connection Settings
PVC Info (VPI.VCI): 0.101
Type: IPoE
TCP/IP Settings
IP Address: 188.**.**.**/21
Default Gateway: 188.**.**.*
Primary DNS: 87.***.***.***
Secondary DNS: -Thanks