Hello All,
I am having some confusion re: VLAN setup. I have looked through the posts here, but don't see a specific solution. I used BarryG's VLAN post as a starting point.
I have setup 4 VLAN interfaces on the Astaro (version 9.004). VLAN 1, 10, 20, 30
I have 2 Dell 2724 switches.
VLAN 10 is my main, internal network.
VLAN 1 is the default VLAN and I left that in place for management. The Dell switches keep that VLAN reserved and the management IP on the switches is in that VLAN.
VLAN1 is untagged for all ports on the switch and that can't be changed. I have tagged the trunk ports for the other VLANs and then I untagged individual ports based on VLAN membership.
From my computers on VLAN 10 I am able to access the network, Internet, Astaro, etc., but I cannot traverse the firewall to VLAN1. I can ping the IP address on the Astaro for the VLAN1 interface, but can't access the switch web admin interface which resides on the VLAN1 subnet. I cannot ping the switch from the Astaro.
I setup a laptop on VLAN1 and was able to access the switch, at least temporarily.
I have packet filter rules on the firewall allowing all traffic between VLAN1 and VLAN10.
I'm thinking I'm missing something obvious, but can't see it.
Any help is greatly appreciated.
Thanks
David
I am having some confusion re: VLAN setup. I have looked through the posts here, but don't see a specific solution. I used BarryG's VLAN post as a starting point.
I have setup 4 VLAN interfaces on the Astaro (version 9.004). VLAN 1, 10, 20, 30
I have 2 Dell 2724 switches.
VLAN 10 is my main, internal network.
VLAN 1 is the default VLAN and I left that in place for management. The Dell switches keep that VLAN reserved and the management IP on the switches is in that VLAN.
VLAN1 is untagged for all ports on the switch and that can't be changed. I have tagged the trunk ports for the other VLANs and then I untagged individual ports based on VLAN membership.
From my computers on VLAN 10 I am able to access the network, Internet, Astaro, etc., but I cannot traverse the firewall to VLAN1. I can ping the IP address on the Astaro for the VLAN1 interface, but can't access the switch web admin interface which resides on the VLAN1 subnet. I cannot ping the switch from the Astaro.
I setup a laptop on VLAN1 and was able to access the switch, at least temporarily.
I have packet filter rules on the firewall allowing all traffic between VLAN1 and VLAN10.
I'm thinking I'm missing something obvious, but can't see it.
Any help is greatly appreciated.
Thanks
David