vlan routing astaro and cisco AP1252g

Hello everyone!

I'm in to following situation:
Cisco AP1252G multiple ssid vlan 1 and vlan 10 and vlan 20 and BVI interface in vlan 1 ip 172.25.2.2/24. In Astaro forum I read cisco don't tagged packages in vlan 1 I'm tried to change to vlan 10 but the ios don't let.

In HP 1810g-8 switch I create vlans, 2 and 3 port tagged vlan 1 vlan 10 and vlan 20.

In ASG120 (v8.308) I'm add vlan interfaces:
vlan 1 ip 172.25.2.1/24, vlan 10 ip 172.25.3.1/24, vlan 20 ip 172.25.4/24.1 in eth2.
eth0 is LAN 172.25.0.1/23

Win2k8 server for Radius autentication ip 172.25.0.4/23
Laptop for config 172.25.0.101/23

1.
Cisco ->2 port in HP
ASG ->3 port in HP
win2k8 and laptop in eth0 with 5port simple dlink switch.

I can ping from laptop the win2k8 server, the ASG eth0 ip, the vlan intervaces in ASG, but can't reach cisco.
From cisco I can't ping nobody.

Greating Bozont