VLan Interface on Hyper-V 2012

Hi at all

I have a virtuell UTM V9 run on a Hyper-v 2012 Server. I mast have the tagging support on the VM.
Whit Powershell I add the Interface to a Trunk Port.
For example
Set-VMNetworkAdapterVlan -VMName UTM -VMNetworkAdapterName InternetNIC -Trunk -AllowedVlanIdList 7-8 -NativeVlanId 1

In the Log of the Hyper-V I can read the following

The connected NIC does not support VLAN trunk mode on switch E582837C-657B-4F61-AB16-42CBABD4F3AE (Friendly Name: Dynamischer Ethernet-Switchport) port 42C987F1-93FE-438B-A8A5-BD2D7E70A892 (Friendly Name: Internet).

Also can I read that the Integration Tools are too old.

Networking driver in UTM loaded but has a different version from the server. Server version 4.0 Client version 3.2 (Virtual machine ID E91E3E4F-D50E-4DA5-84F5-C28F1E8193C8). The device will work, but this is an unsupported configuration. This means that technical support will not be provided until this problem is resolved. To fix this problem, upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu.

How can I upgrade the Integration Tools to Hyper-V 3 (2012)?

Thanks

Runnel