Latency + SSD

Hi,

I'm currently testing the latest version of astaro / sophos. on a dell poweredge 320 (ssd). Network card: Broadcom BCM5720

I just realized that the ping times are bad :confused:

//

ping 192.168.0.254
PING 192.168.0.254 (192.168.0.254): 56 data bytes
64 bytes from 192.168.0.254: icmp_seq=0 ttl=64 time=2.666 ms
64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=2.722 ms
64 bytes from 192.168.0.254: icmp_seq=2 ttl=64 time=2.721 ms
64 bytes from 192.168.0.254: icmp_seq=3 ttl=64 time=2.619 ms
64 bytes from 192.168.0.254: icmp_seq=4 ttl=64 time=2.710 ms
64 bytes from 192.168.0.254: icmp_seq=5 ttl=64 time=2.711 ms
64 bytes from 192.168.0.254: icmp_seq=6 ttl=64 time=2.685 ms
64 bytes from 192.168.0.254: icmp_seq=7 ttl=64 time=2.708 ms
64 bytes from 192.168.0.254: icmp_seq=8 ttl=64 time=2.628 ms
64 bytes from 192.168.0.254: icmp_seq=9 ttl=64 time=2.714 ms
64 bytes from 192.168.0.254: icmp_seq=10 ttl=64 time=2.707 ms
64 bytes from 192.168.0.254: icmp_seq=11 ttl=64 time=2.707 ms
64 bytes from 192.168.0.254: icmp_seq=12 ttl=64 time=2.701 ms
64 bytes from 192.168.0.254: icmp_seq=13 ttl=64 time=2.617 ms
64 bytes from 192.168.0.254: icmp_seq=14 ttl=64 time=2.693 ms
64 bytes from 192.168.0.254: icmp_seq=15 ttl=64 time=2.703 ms
^C
--- 192.168.0.254 ping statistics ---
16 packets transmitted, 16 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 2.617/2.688/2.722/0.035 ms

//

I'm directly connected so, hmm whats wrong here?

A quick question about the trim support which seems to be onboards since version 8.308 or something.
Do I have to enable it or should it work out of the box?

Best Regards