I have been trying to get Astaro Essential up and running for a while now, and have been having difficulties getting it running. I perform the setup without problems, and set our static IP on the WAN, etc.
Our network is segmented into VLANs 1,2,3,5,6 with a central switch doing all the inter-VLAN routing. This is required as we have branch offices connected to our main office over a fibre provider. The default gateway for each VLAN is 192.168.VLAN#.1. The internet vlan is 3.
After inputting the static gateway routes into the routing table, I am able to do the following:
- Ping the firewall from a workstation PC in VLANs 1,2,5,6
- Ping workstations from firewall in VLANs 1,2,5,6
- Tracert/Reverse DNS/Ping google.ca from the firewall
- Able to check update status from firewall
Unable to:
- Surf internet from workstations, ping sites, etc
- Even if the workstation is configured to VLAN3
- Cannot ping google IPs from workstations, but can from firewall
When pinging a website from a workstation, it is unable to resolve the DNS. When putting the network back on the old firewall, it returns to normal, even after the firewall is put into factory settings and just basics are set.
The main switch has routing tables set for each VLAN automatically, and I have added the following static line:
D: 0.0.0.0 S:0.0.0.0 Pref:60 Interface:3 Next Hop: 192.168.3.4
LAN interface is configured as: 192.168.3.4, 255.255.255.0, 192.168.3.1
Completely out of ideas as to where the problem is. Thoughts?
Our network is segmented into VLANs 1,2,3,5,6 with a central switch doing all the inter-VLAN routing. This is required as we have branch offices connected to our main office over a fibre provider. The default gateway for each VLAN is 192.168.VLAN#.1. The internet vlan is 3.
After inputting the static gateway routes into the routing table, I am able to do the following:
- Ping the firewall from a workstation PC in VLANs 1,2,5,6
- Ping workstations from firewall in VLANs 1,2,5,6
- Tracert/Reverse DNS/Ping google.ca from the firewall
- Able to check update status from firewall
Unable to:
- Surf internet from workstations, ping sites, etc
- Even if the workstation is configured to VLAN3
- Cannot ping google IPs from workstations, but can from firewall
When pinging a website from a workstation, it is unable to resolve the DNS. When putting the network back on the old firewall, it returns to normal, even after the firewall is put into factory settings and just basics are set.
The main switch has routing tables set for each VLAN automatically, and I have added the following static line:
D: 0.0.0.0 S:0.0.0.0 Pref:60 Interface:3 Next Hop: 192.168.3.4
LAN interface is configured as: 192.168.3.4, 255.255.255.0, 192.168.3.1
Completely out of ideas as to where the problem is. Thoughts?