Hi there!
I've a fresh active/passive cluster installation of Astaro Security Gateway V8.300 on a new Dell PowerEdge R310 running with
eval license at the moment.
If i configure a Server Load Balancing, the state of the real servers goes on/off all the time - so it isn't working.
I've found following in the Service Monitor daemon-Log:
I logged in to the shell and this is the output of the directory:
In my other Astaro-Installations, there are some additional files created for each loadbalancing-rule but here aren't any.
Has anyone an idea where to look?
I've tried to reproduce it in a fresh test-installation on a XEN host with V8.300 but there everything worked fine.
I've updated to V8.301 but nothing changed (so the servers where rebooted too).
At the time where the "slave" was primary, i've created a load balancing too but the files weren't created at this host too.
Everything else seems to work fine...but the Firewall isn't at productive use right now so I havent tested much.
Thank you for you help...
Hardware:
Dell PowerEdge R310
XEON CPU
8GB RAM
PERC H700 Raid1 (2x250GB SAS)
2x Broadcom LAN onboard
4x Intel LAN (quad-port card)
Cluster: active/passive with direct link @ eth0
License: evaluation (13 days left)
I've a fresh active/passive cluster installation of Astaro Security Gateway V8.300 on a new Dell PowerEdge R310 running with
eval license at the moment.
If i configure a Server Load Balancing, the state of the real servers goes on/off all the time - so it isn't working.
I've found following in the Service Monitor daemon-Log:
Quote:
|
2012:03:03-00:01:47 rzfw-1 service_monitor[12403]: id="4000" severity="info" sys="System" sub="loadbalancing" name="Starting real server checker with 2 threads" 2012:03:03-00:01:52 rzfw-1 service_monitor[12403]: id="4000" severity="info" sys="System" sub="loadbalancing" name="REF_PacLoaHttpToInter 1 TCP 10.0.70.44:80 changed state to OFFLINE" 2012:03:03-00:01:52 rzfw-1 service_monitor[12403]: id="4000" severity="info" sys="System" sub="loadbalancing" name="REF_PacLoaHttpToInter 0 TCP 10.0.70.31:80 changed state to OFFLINE" 2012:03:03-00:01:53 rzfw-1 service_monitor[12403]: id="4003" severity="error" sys="System" sub="loadbalancing" name="Cant open file /proc/net/ip_scheduler/REF_PacLoaHttpToInter!" 2012:03:03-00:01:53 rzfw-1 service_monitor[12403]: id="4003" severity="error" sys="System" sub="loadbalancing" name="Cant open file /proc/net/ip_scheduler/REF_PacLoaHttpToInter!" |
Quote:
|
<M> loginuser@rzfw:/proc/12419/net/ip_scheduler > ls -l total 0 -r--r--r-- 1 root root 0 2012-03-03 12:00 cluster_ftp -r--r--r-- 1 root root 0 2012-03-03 12:00 cluster_http -r--r--r-- 1 root root 0 2012-03-03 12:00 cluster_ipsec -r--r--r-- 1 root root 0 2012-03-03 12:00 cluster_pop3 -r--r--r-- 1 root root 0 2012-03-03 12:00 cluster_smtp -r--r--r-- 1 root root 0 2012-03-03 12:00 cluster_snort -r--r--r-- 1 root root 0 2012-03-03 12:00 cluster_waf |
Has anyone an idea where to look?
I've tried to reproduce it in a fresh test-installation on a XEN host with V8.300 but there everything worked fine.
I've updated to V8.301 but nothing changed (so the servers where rebooted too).
At the time where the "slave" was primary, i've created a load balancing too but the files weren't created at this host too.
Everything else seems to work fine...but the Firewall isn't at productive use right now so I havent tested much.
Thank you for you help...
Hardware:
Dell PowerEdge R310
XEON CPU
8GB RAM
PERC H700 Raid1 (2x250GB SAS)
2x Broadcom LAN onboard
4x Intel LAN (quad-port card)
Cluster: active/passive with direct link @ eth0
License: evaluation (13 days left)