Hello,
i already have seen the article about the RED box. But we have an ASG425 on the one side and a ASG525 at the HQ.
Our Astaro reponsible said that i just have to add the Host (1.2.3.4) to the remote networks on the branch side and also define it as "local network" at the hq side.
Then i put "external interface" at the global settings from wireless security. And it should work.
But well. it doesn't.
I've also set "automatic firewall rules" on both sides. I can see that the packets arriving at the HQ firewall.
From Packetlog (green - allowed) after manually setting the rules for the tunnel:
9:19:28 Packet filter rule #5 TCP 192.168.x.wlan 48959 → 1.2.3.4 : 2712
[SYN] len=52 ttl=63 tos=0x00 srcmac=0:x:e8 dstmac=0:x:c0
But i won't get anymore. This is where it repeats. Any suggestions ?
Greets
Stephan
i already have seen the article about the RED box. But we have an ASG425 on the one side and a ASG525 at the HQ.
Our Astaro reponsible said that i just have to add the Host (1.2.3.4) to the remote networks on the branch side and also define it as "local network" at the hq side.
Then i put "external interface" at the global settings from wireless security. And it should work.
But well. it doesn't.
I've also set "automatic firewall rules" on both sides. I can see that the packets arriving at the HQ firewall.
From Packetlog (green - allowed) after manually setting the rules for the tunnel:
9:19:28 Packet filter rule #5 TCP 192.168.x.wlan 48959 → 1.2.3.4 : 2712
[SYN] len=52 ttl=63 tos=0x00 srcmac=0:x:e8 dstmac=0:x:c0
But i won't get anymore. This is where it repeats. Any suggestions ?
Greets
Stephan