{8.930} IDS Performance Problem
This jsut cropped up. I have two asg's inside of hyper-v. The first one is 8.301 with 4 vpcu's with a 25% reservation with a 75% max cpu. 2 gigs of ram and 3 nics. I get full cable performance of 30...
View ArticleIPv6 Freenet6 Astaro 8.302 Home VMware Server Server 2008 und Windows 7
Hallo Leute, wollte euch mein Problem und meine Lösung für folgende Zusammenstellung mitteilen: - Server 2008 mit VMware Server2 - Astaro 8.302 als VM, Netze Brigged - Internet Einwahl per PPPoE, IPv4...
View ArticleMultipath / Uplink balancing
Hello, I have 2 WAN interfaces on my ASG eth1 = DSL with static IP eth2 = LTE / UMTS with dynamic IP All Users should surf over LTE (eth2) and all anything traffic must be run over DSL In the ASG I...
View Articleping aus DMZ ins interen Netz geht durch
Hallo, ich weiss das hier dazu mal was gelaufen ist aber ich findenden passenden Artikel nicht mehr. Meine DMZ 192.168.29.x kann per ping meine internen Systeme auf 192.168.26.x anpingen. Wie kann ich...
View ArticleOpendns OK, missing error message though ?
Hi Folks. I followed the instructions found here: http://www.astaro.org/145797-post2.html And by using their test pages, here: OpenDNS > Support > Knowledge Base > Testing for Successful...
View ArticleAdditional DynDNS option
t would be nice to have OpenDNS as an option on this page so that we can update out OpenDNS address and allow their filters to work as well. Thanks
View Article[8.930][DUPE] Additional DynDNS option
t would be nice to have OpenDNS as an option on this page so that we can update out OpenDNS address and allow their filters to work as well. Thanks
View ArticleNetwork usage graphs are empty
The network usage graphs on my v5 120 are all empty of data. Not sure if this had been previously reported.
View Article[8.930] Network usage graphs are empty
The network usage graphs on my v5 120 are all empty of data. Not sure if this had been previously reported.
View ArticleMultipath Rule Precedence
Hello, Are packets evaluated against multipath rules in order (rule 1, 2, 3, ..., N)? If so, then a rule such as: Host1 -> Any IP Traffic -> Any Destination ->WAN2 will route all of Host1's IP...
View ArticleLoad Balancing
Hi i am new to all these stuff i am using astaro 320.and i am just a beginner and trying tosort out to many things i want to balance load for particular user i have created user for each of the...
View ArticleClik here to view.
[8.930] html5 vpn
At this time it does not seem to be possible to choose the character encoding of a web site through the HTM5 Portal. See attached images for problems with a non english language. Any suggestions?...
View ArticleClik here to view.
[8.930]BUG: GRE bandwidth usage broken when using pptp
I have this problem in reports for one day only. The next day the problem disappears so I don't know if it some strange anomaly. Setup: Regular pptp remote access setup with static vpn pool. I accessed...
View ArticleCan you use WAF with HTTPS by just forwarding the HTTPS and not loading cert?
I'm trying to get WAF working but I don't want it to break the SSL cert; I want it to just pass it on to the servers. Is that possible? The reason I'm trying this is because Server Load Balancing in...
View Article[8.930][OPEN] High CPU when Querying via SNMP
[8.930]ASG120, new unit, I set up nagios to poll for SNMP bandwidth utilization from two of the ethernet interfaces in 3 sec intervals. The CPU utilization of the ASG went from ~50% to ~95% and stayed...
View ArticleConnection timed out
Hello guys! Good day!I'd like to ask what causes a connection timed out on a specific website.i've added that url to allowed lists and i even tried putting it on trusted websites(created on network...
View ArticleDSL Pk5000Z modem reboots/power cycles at random intervals
I have recently setup the Astaro Gateway with a Home Use License. Everything was fine for approximately 24 hours. Then the DSL modem (an Actiontec PK5000z from Qwest/Century Link) started to power...
View ArticleLAN to LAN
LAN1 eth0 192.168.10.x - configured web proxy, smtp proxy, etc. LAN2 eth4 192.168.100.x LAN1 and LAN2 should be configured so that all traffic is routed in both directions - without proxy. I have...
View Article2nd email server
Hi, We've already had one exchange server which was use astaro 7 as smtp relaying and emails in/out are processing perfectly. All emails must go to postini before going out (upstream hosts). However,...
View Article[8.930][DUPE] User Portal - Czech translation broken
The topic pretty much sums it up. If the end user portal is shown in Czech it comes out as a huge mix of Czech and English.
View Article